Complete sets

COMPLETE SETS OF MY MOCs AVAILABLE, WITH INSTRUCTIONS AND ALL PARTS. Just go to SETS page, or click HERE

Friday, March 9, 2012

MPS. Front axles V: Double wishbone with Lego hub I

Note: Lego hub is this part x873c01

With drive (code: F.CD)

Type 1

- F.CD.1.1A - Pushrod A


Standard: Yes
Max. shock adsorvers allowed: 1
Space for an auxiliary transmission under the axle: Yes
Easy conversion to right steering wheel: Not necessary, steering transmission in the center
Advanced steering ans suspension geometry:
- Ackerman steering: No
- Camber angle: No
- Caster angle: No
- Kingpin inclination: No



- F.CD.1.1B - Pushrod B

Standard: Yes
Max. shock adsorvers allowed: 1
Space for an auxiliary transmission under the axle: Yes
Easy conversion to right steering wheel: Yes
Advanced steering ans suspension geometry:
- Ackerman steering: No
- Camber angle: No
- Caster angle: No
- Kingpin inclination: No



- F.CD.1.2 - Mid-size space (7 studs wide)

Standard: Yes
Max. shock adsorvers allowed: 1
Space for an auxiliary transmission under the axle: Yes
Easy conversion to right steering wheel: Yes
Advanced steering ans suspension geometry:
- Ackerman steering: No
- Camber angle: No
- Caster angle: No
- Kingpin inclination: No


- F.CD.1.3A - Large space A (9 studs wide)

Standard: Yes
Max. shock adsorvers allowed: 1
Space for an auxiliary transmission under the axle: Yes
Easy conversion to right steering wheel: Yes
Advanced steering ans suspension geometry:
- Ackerman steering: No
- Camber angle: No
- Caster angle: No
- Kingpin inclination: No


- F.CD.1.3B - Large space B (9 studs wide)

Standard: Yes
Max. shock adsorvers allowed: 1
Space for an auxiliary transmission under the axle: Yes
Easy conversion to right steering wheel: Yes
Advanced steering ans suspension geometry:
- Ackerman steering: No
- Camber angle: No
- Caster angle: No
- Kingpin inclination: No


- F.CD.1.4 - XXLarge space (13 studs wide)

Standard: Yes
Max. shock adsorvers allowed: 1
Space for an auxiliary transmission under the axle: Yes
Easy conversion to right steering wheel: Yes
Advanced steering ans suspension geometry:
- Ackerman steering: No
- Camber angle: No
- Caster angle: No
- Kingpin inclination: No
Note: Special design to get huge space, you can put in for example my mini secuential gearbox. This is the front axle used in my Mini Cooper


You can read more about the Modular Platform System here: MPS

21 comments:

tuur said...

good work ( like alway's)
but wath do you think that's the best solution for steering with a M motor (I meen witch toothweels do you need to use for easly steering with a M motor)

Χαμένο κορμί said...

You are a lego GOD... and I just found you. I downloaded you step by step instructions for the gearboxes... is there any chance for a step by step instruction for the suspensions too?

Sheepo said...

Only looking closely the digital files, you must be able to build an axle without step by step instructions

Em said...

Hello Sheepo,

I've just downloaded SR3D and the file with all the chassis and axles above. When I have uploaded one of your files to SR3D, I don't know how to rotate the selection. Can You please tell me how to rotate the whole selection? I've already searched a lot at the internet - but without any luck.

I hope You will help me..

Sheepo said...

Very easy, on the model keep pushed the mouse right button and move it ;)

Anonymous said...

i love your creations i going make some cash for a rc model, you know it already arent jou? i'm dominic remeijsen and i like some info for a suspencion so thanx to you is will become a huge builder thanx to that sheepo!!!me slr will be cooler than cool! please react

Laurens-wuyts said...

Can you post them step by step? Or PDF? Becouse i can't open the "SR 3D building".

Anonymous said...

mi computer non leje los files! puede caricarlos en pdf?

Sheepo said...

Because you need SR3D Builder to open it...

Unknown said...

will you have step by step instructins for all the MPS's and not just a 3D image on SR3D?

Sheepo said...

The MPS elements are very simple, and I think that they don't need a step by step instructions.

jack10142 said...

Could you take pictures of the bottoms of the MPS for the people that are unable to run SR3D?

Sheepo said...

If you can't run SR3D, go to the autor webpage and read the help to install it

Unknown said...

What suspension did you used by your mini cooper Mark 1? (Front and back wheels) Pls give links,

Thanks!!!

Anonymous said...

i changed the file names to .LDR and when i open them it wont do instructions and sr3d doesn't work at all

Sheepo said...

It is imposible get the step by step instructions directly from .ldr file in any program. But the files are very simple, you can reproduce the axles only looking the 3D model.

Unknown said...

can you make a pdf

Sheepo said...

No, I can't.

Unknown said...

can you make a instruction in pdf
please

Sheepo said...

Again, I can't, try by yourself if you think you can do it...

Anonymous said...

Hi. Great job on the whole MPS system :) Do you have any thoughts on which front and rear axle to combine to make a Pickup (ford ranger)?

Post a Comment