Saturday, February 25, 2012

MPS. Front axles IV: Double wishbone II

With drive (code F.BD)

Type 2

- F.BD.2.1 - Pushrod


Standard: Yes
Max. shock adsorvers allowed: 1
Space for an auxiliary transmission under the axle: Yes
Easy conversion to right steering wheel: Yes
Advanced steering ans suspension geometry:
- Ackerman steering: No
- Camber angle: Yes, varibable with suspension position
- Caster angle: Yes
- Kingpin inclination: No

Wednesday, February 22, 2012

MPS. Rear axles III: Double wishbone with Lego hub

Note: Lego hub is this part x873c01

With drive (code R.BD)

Type 1

- R.BD.1.1 - Pushrod


Standard: Yes
Max shock adsorvers allowed: 1
Advanced suspension geometry (Camber angle): No

Monday, February 20, 2012

MPS. Front axles III: McPherson II

Without drive (code: F.A)

Type 1

- F.A.1B


Standard: Yes
Max. shock adsorvers allowed: 1
Space for an auxiliary transmission under the axle: Yes
Easy conversion to right steering wheel: Not necessary, steering transmission in the center
Advanced steering ans suspension geometry:
- Ackerman steering: No
- Camber angle: Yes, variable changing the axle 3L with stud that hold the shock absorver
- Caster angle: Yes
- Kingpin inclination: Yes

Saturday, February 18, 2012

MPS. Rear axles II: Live axle

With drive (code F.CD)

- R.CD.1


Standard: No, it need a big hole in the chassis for the drive shaft.
Max shock adsorvers allowed: 3
Advanced suspension geometry (Camber angle): No

Notes: The green liftarm on the axle means that the axle need a support to keep the structure enough strong, but you can put this support anywhere you want in the top.

Tuesday, February 14, 2012

MPS. Front axles II: Double wishbone I

Without drive (code F.B)

Type 1

- F.B.1.1 - Pushrod


Standard: Yes
Max. shock adsorvers allowed: 1
Space for an auxiliary transmission under the axle: Yes
Easy conversion to right steering wheel: Yes
Advanced steering ans suspension geometry:
- Ackerman steering: No
- Camber angle: Yes
- Caster angle: Yes
- Kingpin inclination: Yes, very light, variable

Sunday, February 12, 2012

MPS. Rear axles I: Double wishbone I

Type 1

- R.AD.1.1A - Pushrod A


Standard: Yes
Max shock adsorvers allowed: 3
Advanced suspension geometry (Camber angle): Yes, variable along the suspension position

MPS. Chassis I

- Unibody Type1 (C.A.1)


Standard: Yes
Wheel base: 29-38, changing the red liftarm (you can use the color you want ;) )
Width: 21-25, changing yellow liftarms
Strength test:
 - Central load: 8/10
 - Torsion load: 5/10

MPS. Front axles I: McPherson I

Without drive (code: F.A)

Type 1

- F.A.1


Standard: Yes
Max. shock adsorvers allowed: 1
Space for an auxiliary transmission under the axle: Yes
Easy conversion to right steering wheel: Yes
Advanced steering ans suspension geometry:
- Ackerman steering: Yes, but very light
- Camber angle: Yes, variable changing the axle 3L with stud that hold the shock absorver
- Caster angle: Yes
- Kingpin inclination: Yes

Modular Platform System (MPS)

Probably the most popular vehicles to build MOCs are the Supercars.
We all love cars and the more fast and sports better, but if someone wants to make a Technic Supercar in big size and some complexity (scale 1/10 is the most used) and you don't have a good knowledge of the techniques, build it can be very complicated and end up as hopeless.


This system was created with the idea of ​​helping all those people who want to make a supercar at approx. scale 1/10 and still not have enough knowledge to start, or want to make a car with more advanced specs as Ackerman steering, camber angle and do not know how to do it.