I use it because in my opinion it is the best software to create technic models. You can do more things and it has more parts than LDD, and it is easier, more intuitive and quicker to build than MLCad.
Also its 3D models files are compatible with all LDraw tools(MLCad, LDview, etc).
But unfortunately, Sergio Reano, the creator of this awesome program passed away in October 2014.
But today is not possible download the progran fron its official site(HERE).
Quick guide about how to install lastest SR3D in your PC (Windows 7 o newer)
I have uploaded the lastest free available version(0.9.7.81), you can download it HERE.
SR3D uses a very particular software and windows functions to run in and it is hard to get it running correctly.
Usually when try to install SR3D in your PC the installation finish correctly without any advise.
But when you try to execute the program and error message window appears and you can't use it.
I bought a new PC a few months ago and I spend more than 6 hours to find a solution to get the SR3D work properly. I downloaded the newest drivers for all PC devices, newest DirectX, all Windows updates, trying with older SR3D versions, anything you can imagine and nothing worked.
But finally I found a very easy solution for this problem. Actually I don't know why it works, but it does.
This solution worked for in two differents PC, so I hope it work for you too if you can't get the SR3D run correctly.
1 - Uninstall any version of SR3D and LDraw you have in your PC.
2 - Download the lastest version of LDraw All-in-One which included SR3D Builder, it was the 2013_1_v1 version. You can download it HERE
3 - Instant LDraw software tools including at least MLCad, LDraw and SR3D Builder (0.8.9.16 version), I recomend install all tools because they need just a few MB in your HDD.
4 - When the LDraw installation end open SR3D, and finish the instalation (rebuild part list).
5 - When SR3D finish it must work properly with all its functions, but it is not in the lastest version.
Then you can keep in that version if you want, or upgrade it.
6 - To upgrade it just close SR3D and install the lastest version (0.9.7.81) normaly. When the instalation finish it should work properly.
Now if you want you can upgrade LDraw if you want to any version you wish.
I hope this short guide can help you.
32 comments:
Hi, Sheepo. Thank you for sharing. Is the software working in Mac?
No, it is only for Windows. But many Ldraw tools work in MAC
Hey sheepo. Thank you very much for putting this information because I tried to download sr3d 1000 times and didn't work but your solution is great. Thank you
Does SR3d work on windows 10?
Yes, it does. Right now I am using it on Win 10
Thank you very much Sheepo! It work perfect for me on Win 10
Please, could you tell me what are the best tutorials on SR 3dBuilder.
Try with the official SR3D website.
Thank you! but it seems that all content in the "User Manuals" section of official SR3D website was deleted..."URL not found". That's why I asked you if you knew other sources.
Hola Fernando, what will be the next instruction you will sell? Are you planning a new car?
My new car is finished, I am working in the instructions to release both at the same time.
I tried to Install like written here in the Quick Guide under Windows 10 but I can't get it to work. Is there another trick how to get it to work?!
Does it work on Ubuntu 14.04 ?
I don't know, but download it and try!!
Thanks Sheepo. Sad to hear about Sergio's passing. He and I had emailed back and forth about SR3D a few years ago.
Does anyone have a copy of the user manual? When I drag parts around, they snap to things and I can figure out how to rotate and shift them. They seem to only snap to other blocks.
Hello, i made the install twice as you write, but when started the program, have an error:
The file ZSTUD.DAT contain an error: probably TAB character instead of space or there is a missed zero '0' before a dot '.'.
...
The line containing the error is: 4 16 -4 0 -1.5 -4 -4 1.5 -4 0 1.5
SR 3D Builder will terminate
I close sr3d with only task manager.
In the sr3d folder and in the ldraw folder zstud.dat files not contains this line...
What is the problem? (win10/64bit)
Hi, I am sorry but I don't know what is happening with your SR3D
I have the same problem of rszarvas...anyone resolved?
Hi, what is promotional code for registration?
At 4% it goes network error when downloading this all in one ldraw
if someone needs to download it but download wont work click here:
http://www.1000steine.de/downloads/LDraw_AIOI_2016-01_setup_32bit_v1.exe
@Sheepo: I checked if SR3D can still be purchased and it cannot; the paypal link is dead. I was able to make a functional registration.key generator for it, but am not sure if and where/how this could be legally distributed.
same problem of rszarvas
http://sr3d.spoonclan.com/viewtopic.php?f=15&t=694
Hi Sheepo,
I followed your instructions up to before upgrading SR3D to its latest version. When I install the newer version of SR3D, I'm guessing I'm overwriting on where the older SR3D version is? I cannot get it to work for me..
Thanks for your effort on this post,
Frank
@Anonymous: Would you share your registration.key generator? I spent hours in searching for a way for using the advanced features of this great software. It's a shame this will be locked for all future :-(
I got it to work like this:
(no Ldraw or any of the other programs pre-installed which come the the "All-in-on-installer")
1.) Installed latest dot-Net framework, and DirectX module
2.) Downloaded SR3D installer from your link (see above: version(0.9.7.81), you can download it HERE)
3.) On my computer the program was installed into this folder: C:\Program Files (x86)\SR 3D Builder
4.) During installation a window will pop up asking you to unpack the self-extracting archive "FullDownload.exe"
5.) If you simply click [OK], then it'll extract into the same folder.
6.) The self-extracting process will create these folders: Conns, Images, Images_L, Model, p, parts, Temp, TPart, Unofficial.
7.) These are the folders, SR3D tries to find when it asks for "Choose base LDraw Folder (the one you choose for extracting part library)", so select the parent folder, in my case folder "C:\Program Files (x86)\SR 3D Builder"
Have been fiddling all day to get sr3d working on win10 (At creators update) without success until I installed DirectX 9 SDK from
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=2da43d38-db71-4c1b-bc6a-9b6652cd92a3
Sigh . . . Now it finally starts.
But now complains about ZSTUD.DAT it lacks a character zero before a dot. Hmm no very helpfull.
In the folder SR 3D Builder there is the file cachelist.txt
in there remove zstud.dat and it worked for me.
gr
Max
I would like to get the full version (with animation). What do I need to do? You can not buy a key.
Anonymous is right, he said...
In the folder SR 3D Builder there is the file cachelist.txt
in there remove zstud.dat and it worked for me.
Ciao, qualcuno riesce a usare tutte le funzoni come se fosse registrato?
Grazie
Ciao
Mauro
Post a Comment