Complete sets

COMPLETE SETS OF MY MOCs AVAILABLE, WITH INSTRUCTIONS AND ALL PARTS. Just go to SETS page, or click HERE

Sunday, February 10, 2013

Land-Rover Defender 110 instructions are now available!

After a long wait, finally the Land-rover Defender instructions are now available!!!

If you want to learn more about thie creation, please click here

Finally the Defender has 3442(+3 extra) parts including controller(!!)

The instructions are made in PDF format, and they have 448 pages(96 MB).








To view and check the complete part list go to rebricable.com

The instructions cost is only 20€


Please, before purchase the instructions read this!

- If you buy the instructions, YOU ARE NOT ALLOWED TO:
        * RESALE IT
        * SHARE WITH ANYBODY
        * MAKE ANY TYPE OF BUSINESS WITH ITS INTELLECTUAL PROPERTY, Like sell the car built, or rent the car to other people.

- The price is in euros(€). But if your currecy is different don't worry: paypal do the exchange directly to euros from your local currency($, £, ¥...) for you. Also under special request I can accept a different way to pay the instructions.

- If you don't receive your instructions after 48 hours of the payment, please check your spam folder, and if the email is not there please send me an email to: info @ sheepo.es. I always send the instrutions quickly(usually within 24 hours), but sometimes the email never arrives to the destiny.(internet errors, spam filters, etc)

- The instructions will be send(actually a link to download it) to the payment email adress. If you want, I'll send you the instructions to a different email adress, please leave a comment in the paypal payment.

- For MAC users: mac can't open zip files with password, to open the instructions you will need an extra software (you will can find a lot of free software in internet to do it).

- Build this car is very hard, if you have never built a Lego Technic set, I recommend you to do it first. Doing that is not necessary but it will help you later when you built the Land-Rover

- I forgot add and advice in the page 172 about how to put correctly the parts. here you can see how to put it: the Axle Connector Smooth has two rounded sides and two flat sides. It is very important that the internal pins of the Driving Ring (6539) coincide with the flat faces of the axle connector


- I forgot too add a clutch's support in the instructions(the necessary parts are in the part list, this doesn't change)
To build it follow this pictures just after the page 154


 - The instructions has been tested by a Lego Technic expert builders, if you can't built the car and you think the instructions are wrong, check your built twice before ask me.


- If you have problems with the gearbox try this. You can try two different solutions for this problem:

1 - Check the change levers(which connect the slider to the red ring) searching parts with too friction. Carefully move the levers sideways to get some extra space and also reduce friction. If this solution doesn't work try the second one.
2 - Add a third rubber band in the slider (page 228) to get some extra force in the change levers

Also you must think that the pieces are not perfect, so the gearbox are not 100% reliable, it should make good around the 90% of the speed changes

- There is a little mistake in the instructions in the IR receivers order, this is the correct order:

Behind the driver(in the right of the car) receiver in channel #2 with its wires. Range gearbox and 2dw/4wd selector.
In the center, receiver #1, Drive and brakes (it is well placed in the instructions)
In the left receiver #3, Main gearbox and steering


Finally to buy the instructions go to INSTRUCTIONS PAGE

Frequently Asked Questions

- What is the best site to buy the parts? -> www.bricklink.com

- What happens if I lose my instructions copy(hard drive failure or virus)? -> I have a data base with all costumers of my instructions, if you lose it you can email me and will send it to you again free.

- There is any Lego Technic set which I can buy to reduce the parts cost? -> No, but you can buy the Technic set 8110 (Unimog). With it you can't reduce the parts cost(of course you still need many spare parts), but after building the car, you stay a few hundred parts for you.

116 comments:

Ruferto said...

Payment done! Waiting instructions...
:)

What will come next? Supercar... :)

Unknown said...

Thanks sheepo!!!

Atomik WiWa said...

Good job! Sheepo!!

Parda said...

That instructions look very good, as oficial ones

Anonymous said...

Make the porsche 911 instruction please!!!!!!!!!!!!! It's my favourite of your Mocs.

djshiver said...

Payment done! :)

Stephen said...

Just received your instructions, Fantastic! I'm gathering kits/parts right now (that's half the fun) Looking forward to begin building........

Ignas said...

Fantastic model! When this will be available at rebricable.com? I want to know how many parts i need to build this.

Unknown said...

Payment done!
Thanks sheepo!!!

Anonymous said...

Gracias Fernando, que emoción poder hacer uno de tus modelos....

Juan Valderrama.

Anonymous said...

the parts need information in Rebrickable.com is exact correct? thank you.

Anonymous said...

Hi Anonymous, February, 2013 at 6:30 AM,

Ohhh come on, that's not expensive. €20 for something Sheepo probably have used morethan 100 of hours on. That's not what I call expensive. The set contains more than 3400 parts and it takes very long time to make such a big instruction!

Anonymous said...

Is it possible for me to look at the parts list before buying the instruction? Btw the price (20 euro) is totally worth it!

Sheepo said...

You must read the complete entry ;)

Anonymous said...

Incredible sheepo. Well done! I hope to see it at nortebrick!

Anonymous said...

Hello Sheepo!!! Please tell me how I can order all the parts for Lego Land Rover Defender 110 in Russia and how much they should cost?

Blastem said...

The First Technic UCS instructions are available. Nothing better than one of Sheepo's great MOCS

Thanks Sheepo for this dream car in LEGO :)

Anonymous said...

Are you going to make the instructions for the porsche 911?

Unknown said...

Sheepo, is there an estimation, how much are all the parts required to build this car? I am real fan of the defenders and this is the best model I have ever seen.

Anonymous said...

Hi Sheepo
Looking forward to getting the instructions - Keep up the good work

Sheepo said...

Thanks!! fixed.
ALso I have add and advice to built correctly the gearbox.

Kees Onrust said...

Sheepo,

You and Jurgen made my day.
You won't see me here for a while.................. I've a Defender to build.

Thanks,
Kees.

Anonymous said...

Will buy soon. Definately worth the price, even in Canadian $! I would also buy other instructions...(hint hint)

dj shiver said...

Too expensive 20 Euro? But I hope you're kidding! With all the work behind it, technology, engineering solutions totally unknown to the Lego and attention to detail.
Come on ...

Anonymous said...

How much are the complete parts at bricklink?

THX

Anonymous said...

just in time for March 2013 :)

Anonymous said...

For anyone interested I have ordered all the parts (or close enoughs) and it was about $700 AUD (that includes shipping from 7 stores). Obviously all the electric items are relatively expensive and you could save quite a lot using what you already have.

Stephen said...
This comment has been removed by the author.
Vi said...

Hola Sheepo. Soy Vi en HispaLUG y acabo de pagar las instrucciones, pero en el mensaje de PayPal no me ha cabido todo lo que quería escribirte. Además de pedirte disculpas por la falta de espacios en aquel mensaje, sólo añadir a lo que ya te puse, que por favor sigas desarrollando maravillas como las hasta ahora vistas y que no dejes de pasarte por allí de vez en cuando. Un saludo;

Anonymous said...

Hi, i'll buy your model from Lego CUUSOO when it will be available, but at the moment i don't know the price; can you answer at my question please? Thank you!

Francesco

P.S. Compliments for your MOC (Defender) it's very very nice! i'm sorry for my english.

Anonymous said...

Hi Sheepo,
i am about to buy your instruction and would like to get an idea of the parts costs. Do you have any idea how much I would spent on it?

Thank you in advance,

Jelte

Sheepo said...

You can see by yourself downloading the part list and check it in bricklink.com

Anonymous said...

Sheepo please reply! :)

Thank you!
Francesco

Sheepo said...

I don't know the final price for the cuusoo model, even I don't know if Lego finally will made it as a Lego Official set, because if a model in cuusoo get the 10000 vote Lego can decide if they will made it or not.

Anonymous said...

ok, thank you and compliments for your mocs. I wish they will produce your set ;) .

Bye!
Francesco.

Anonymous said...

How can I see the total price of the partslist on Bricklink.com?

Your creations are really impressive!

Gr
Dennis

Sheepo said...

You should add all parts to your wanted list and sort the stores that contain the parts, but the total part cost if you don't have any part is around 600€

tuur said...

are we goeing to hear something new about the MPS or is that a closed chapter ??

Stephen said...

I've just finished building the body (wanted to see how large this MOC is)
Well.........it's large!! The assembly went together really well, did't have any problems. I had to 'back-track' twice to fix small assembly issues I missed in the details.
Thanks Sheepo for sharing this great creation of yours. I feel very lucky to build this MOC.

Anonymous said...

On tuesday I finished my Deefender and It's the best moc I've ever built.
Thank You for the instructions

Anonymous said...

Can you put free instructions for the gearbox please

Sheepo said...

The secuential mechanism are integrated in the chassis, so for publish the complete gearbox I need to publish the whole chassis and will not do that...

Anonymous said...

Have ordered all the parts to build the 110.
Now just have to wait until all has arrived.
Unfortunatly will probably take a while.
Oh well, at least got the orders done.
I really do not want to add up the final cost as I think it will scare me a tad.
Anyway looking forward to starting construction of the Defender.

Jamie (another crazy Australia)

Unknown said...

Hello, can you also send the digital files to my email ? SR 3d ?

Payment done! Waiting instructions !

Keep up the good work !

Sheepo said...

I am sorry but I don't share itthe digital files with anybody

Anonymous said...

thanks Sheepo this is a very nice build and with a few tweaks it works perfectly!!!

Anonymous said...

Sheepo, I orderd the parts are started building the Land Rover. I think on the part list one of the part might be missing. There is a Yellow coloured long pin with friction ridges and stop bush that is shown on your build, but is missing in the parts list. I just thought of brining it to your attention.

Anonymous said...

Payment sent.. Awesome enigering. Best regards Johan /SWE

Sheepo said...

I know this fail in the instructions, sorry ;( , but if to look the read pins you can see the quantity of it is same that the red pins more the yellow ones in the instructions. You only must use red pins and you shouln't have problems.

Anonymous said...

Sheepo No worries on the missing Yellow pin. Everything on the build is going great so far. Thank you for publshing the instructions. Cant wait to complete the build and take the land rover for a spin. You are an awsome lego designer !

Anonymous said...

Sheepo: On page 369 Step 48 the round black piece is not on the part list. What does that part do ? Can I ignore step 48 ? Is it a decorative piece. JV

Sheepo said...

Hi and sorry for this mistake, I updated the part list some weeks ago, but you still have the old one :(, this brack brick round 2x2 is only the fuel tank door, it is no t necessary to fonish the car, it is only decorative.

Stephen said...

I have a little trouble understanding how your transmission works. Should the transmission be in " neutral" when the whole chassis is assembled? Sometimes reverse 'locks-up' the transmission, am I doing anything wrong on the controller or did I make a mistake in the whole assembly?
This is the best MOC I've ever built, but the transmission puzzles me some.

Sheepo said...

The transmission is very complex, and some times is difficult set it correctly... if you have problems with the gearbox please follow the tips I wrote on the "Buy now" botton. The gearbox doesn't have neutral position. But if you want "to push" the car you can put the trasfer case in neutral.

Stephen said...

Thanks Sheepo,

As I mentioned before, this is the best MOC I've ever built. Hats off to your "Genius" mind!
Thank-you for your suggestions, I'm working on it today.
Looking forward to any more 'complex' builds that you publish instructions for.

Unknown said...

just bought the instructions. congratulations on reaching the 10000 votes needed. i cant see how lego can possibly refine your model other than to add a roof, winch, or complimentary trailer or make it look like something out of tomb raider. There is no way i have all the parts required but it is important to me to have the original set of instructions and not legos interpretation.

ben

Anonymous said...

hi sheepo
bought these instructions the second day after their release and still have not even completed the front axel but made a start on the chassis today. I did not know how long this build would take me and how frustrating it is when I only get £30 a month
thanks anyway looking forward to completing the model

bet it'll take until xmas

Anonymous said...

He wont :(

Anonymous said...

Sheepo,

I have finally finished the 110.
It has been a great build and been well worth it.

I did have to revert to the silicon spray to reduce friction a bit.
The cable layout had to be changed a little as well due to having not quiet enough length on one of the motor cables.

Like a few others, I have found the model works perfectly (or as expected for something so complicated) without the body fitted.
When the body is attached I believe a combination of the extra weight and pressure caused by the body pushing the motor cables onto the top of the gear box cause the car to malfunction a bit.

What I would like to say is 'Job well done' it was a fantastic model to build and in my mind the one that other models will be compared against for complexity.

Look forward to building another of your models.

Regards,

Jamie

Unknown said...

Worths every cent, thank you very much, waiting for the instructions, Keep up, very good job man. Respect Szily

Unknown said...

I just bought the instruction online and am planning to build one soon. However, this could be one Lego set i don't wanna disasemble except the motors ... if taking just the motors out (& put back in later) is easy without the need to take the whole chassis apart (so that the expensive motors can be used on other Lego set) ... is it possible?

Sheepo said...

Yes, it is very easy remove the motors keeping the rest of the car intact.

Ralf said...

I think this is my next projekt (Defender), if i have finished Jurgens Ultimate 42009.
20€ is a fair price!!! I know how many work is inside the manual............

Anonymous said...

Fantastic model Sheepo - just finished building it yesterday. Looking forward to buying the instructions for the next one (and the one after that)! Thanks again for producing this wonderful model and instructions.

Ralf said...

Payment done and now i have to wait............. ;) I think it should take some weeks to collect all the parts....... awesome car the Defender!

Unknown said...

Hi, do you have a parts list for the chassis on its own? I would like to try and build this, as I have a body that I think I would be able to fit on. Many thanks.

Sheepo said...

Hi, I don't have it. Only for the complete model.

Unknown said...

That's ok, but thanks anyway!

Anonymous said...

Hi there, may i ask where can i find the list of all parts of Land rover
many thanks

Sheepo said...

It is in this entrace... you should read it again ;)

Unknown said...

dont know how to add parts to wanted list

Sheepo said...

1: Bricklink->My wanted list-> Upload
2: Open the TXT file and copy all the content
3: And paste the contant in the boxtext in upload page

Anonymous said...

how much cost your jeep defender 110 ?
I want buy it

Sheepo said...

You can't buy the complete kit to built it. you must buy the instructions here, and the parts in other stores, like bricklink.com

jsdodger said...

Payment done! I can hardly wait to see complete instructions:-)
I would like to know too is there a way to build the Defender without Power Funktions?

Very nice, very good Job, sheepo!

Adam M said...

How much did all the parts cost too buy and were do you get them all from?

Eric said...

hey, sheepo,

i have paid, waiting instructions.

thanks...

Gr Eric

Anonymous said...

I have both the instructions but I would like to build it with a body in a different color. Is there any way to get a part list for the body only?
Thanks

Sheepo said...

I don't have part list for the different parts of the car, only for the whole car. sorry.

Unknown said...

Payment done. This will make an excellent birthday present. Thanks.

Anonymous said...

Hey Sheepo. I love this model. I have buying parts and building it off and on for 7 months. I finally completed it tonight. Steering worked, transfer case, brakes, and high/lo work. My problem is with the gas/gears. I partial took it down and noticed that the gears weren't shifting. Seems like the red sliders weren't moving right. I took apart the drive train to completely rebuild it. Should I do the same with the chassis? Any advice would help!

Sheepo said...

Follow the tips writen just above to the By Now button.

Anonymous said...

thanks. It's shifting better. It grinds when it's in higher gears and seems to go very slow.

Anonymous said...

The clutch doesn't seem to have that fast pop like yours does and like i said, very slow compared to yours. ANy advice on that? Thanks.

Sheepo said...

Try removing one rubber of the two near to the speed change motor

Anonymous said...

Hi Sheepo, finished the model and it's amazing! Many thanks
for making the instructions public!!!
Already bought instructions for your Mustang and tried to
figure out the different gearbox mechanism there. Would you
say that the gear box there is more reliable than the
one used here in the defender?

Sheepo said...

Yes, the new one is much more reliable than the defender ones, and it doesn't need adjust the rubbers.

Unknown said...

Hi Sheepo,
what is the approx price of all the parts to build this marvelous 4 wheel truck ?
thanks
le varan

Anonymous said...

Buenas Sheepo!

Me uno a la ultima pregunta, por cuanto podría salir comprar todas las piezas i tus instrucciones para montar el Defender??

salu2 maquina!!

Sheepo said...

Esta puesto mas arriva, las instrucciones esta puesto al inicio del postm y las piezas sobre 600-650€

Anonymous said...

bonjour
félicitation 4x4 superbe fonctionnement parfait instruction très clair merci pour cette belle réalisation et j'espère a la prochaine construction
boby9254

Unknown said...

i have a little problem with the cable of the steering motor. i must put it straight over the gear box, so it covers the gear numbers. any tipps?

Sheepo said...

There is a little mistake in the instructions IR receivers order:

-Behind the driver(in the right of the car) receiver in channel #2 with its wires. Range gearbox and 2dw/4wd selector.
-In the center, receiver #1, Drive and brakes (it is well placed in the instructions)
-In the left receiver #3, Main gearbox and steering

Unknown said...

Thank's Sheepo for your fast answer. Now the cables fit well. My Landrover is not as fast as yours ... perhops a gearbox prob or the batteries. Will LEgo accu 8878 give more power?

Sheepo said...

The AA battery box with new alkaline batteries has more power than a 8878 battery.

Anonymous said...

Hi Sheepo,
I am from America and I don't have any euros. :( Would there still be a way for me to get the instructions? This is the best MOC I've ever seen and I would really like to build it!

Sheepo said...

Youonly can pay with paypal, and paypal made the exchange automaticaly from your money yo euros.

Unknown said...

Payment done! Fantastic model!
Best regards Michele/Italy :-)

Anonymous said...

This payment is not really dangerous

Madior GAYE said...

Payment done, still waiting for instructions

Anonymous said...

Hi Sheepo, your defender is awesome. I had so much fun building it, the only problem is that the defender is not able to drive uphill. Any tips or is it not construed for driving uphill. Would the gearbox of your Mustang solve the problem? Ernst from Austria

Anonymous said...

Do you think you can add a winch to this model

Anonymous said...

Iam a big fan of land drovers and this model is amazing just some thing else have you ever thought of making a land drover 6✖️6

Sheepo said...

About the winch, I think no, there is no space inside the LR to place another motor. And about the 6x6 no.

Unknown said...

Hi, looks awesome, bricklink, i may be getting it wrong but i have to select every part from sellers? or is there a bulk educated method?. have you looked at Series One landrover shape ?, The winch comment, it has to be done, I will take a look ;-) Thanks for your work

Unknown said...

Would a v8 engine type fit between the motors?

Sheepo said...

In bricklink just upload the part list (.txt file)m then you must select the parts from sellers. i know it is a stupid but there are not other way to do it.
LR Series I is in my mind, but to do it well ut must be green, and there are just a few technic green parts.
And yes, a V8 engine fits perfectly between the motors.

Unknown said...

Hey Sheepo thank you so much for this instruction. I am just wondering, I see some alternative bodywork for the defender 110 in your instruction shop. Are they interchangeable with the body work in this defender? Or do I have to figure a way out to make the compatible?

Sheepo said...

Hi, both Land-Rovers are complitely different, they in different scales, it is no possible modify one of them to fit in the other one.

Voerboer said...

Hi Sheepo, downloaded the instruction and parts list for Bricklink. Now I tried to upload the parts list to Bricklink but for both the bsx file as well as the xml content I get an error stating some component can not be found in the Bricklink Catalog. Any idea how to solve it?

Voerboer said...

Hi Sheepo,

I did some testing and for some reason Bricklink upload does not like:


61903
P
86
8

Voerboer said...

Hi Sheepo,

This seems to be the alternative item:



62520c01
P
86
8

sticky said...
This comment has been removed by a blog administrator.
Anonymous said...

Great work! Any idea for a center and rear differential with locking on this car?

Unknown said...

Ahoj, funguje ešte tento web?

Sheepo said...

Yes, but I have no time to create new models :(

Post a Comment